WX3in1: различия между версиями
UA3IRS (обсуждение | вклад) |
UA3IRS (обсуждение | вклад) (→Ссылки) |
||
| (не показано 17 промежуточных версий этого же участника) | |||
| Строка 1: | Строка 1: | ||
| − | '''WX3in1''' - APRS | + | '''WX3in1''' и '''WX3in1 Plus''' - линейка продвинутых APRS [[диджипитер]]ов от MICROSAT FORUM. |
== WX3in1 == | == WX3in1 == | ||
| + | [[Image:wx3in1.png|400px|right|thumb|WX3in1]] | ||
| + | === APRS клиент/диджипитер === | ||
| + | The main purpose of the device is receiving and sending data frames via APRS radio. WX3in1 is capable of receiving an APRS frame, decoding the sender, recipent, path and information field. Then actions are performed in accordance with the options configured by user: | ||
| + | * Frame forwarding via the APRS network, | ||
| + | * Sending a frame to the APRS-IS server, | ||
| + | * Ignoring the frame if it does not meet the specified criteria. | ||
| + | The device firmware implements the following mechanisms: | ||
| + | * Checksum Verification - frames with errors are ignored, | ||
| + | * Anti-flood - repeated frames in a short time interval are not forwarded, | ||
| + | * Path checking - the decision to frame forwarding is based on a path, the user defines whether to forward WIDE1-1, Widen-N, Spn-N frames and the maximum value of n. | ||
| + | WX3in1 also allows you to generate APRS data frames APRS with information field defined by the user and send them in a specified interval. In this way, it is possible to send beacons and objects. | ||
| + | |||
| + | === APRS-IS клиент === | ||
| + | WX3in1 allows you to connect to APRS-IS network servers. After loging to selected server, it is possible to send data received from the APRS radio network. All frames with correct format and checksum are sent by the device. | ||
| + | |||
| + | ===APRS-IS messages forwarding=== | ||
| + | The device allows you to receive messages from the APRS-IS server. Then the destination station is checked if it is heard in the immediate vicinity of the radio APRS network. If a station is heard then message frame is sent via APRS radio and repeated three times in the absence of confirmation ACK. | ||
| + | |||
| + | ===Weather station server=== | ||
| + | WX3in1 allows you to receive weather information from the WS2300 and WS2350 stations via the RS-232 cable. The data is then encoded into the APRS frame and may be sent to a radio network at specified intervals. Additionally WX3in1 allows you to send the same frames to APRS-IS server. | ||
| + | ===Firmware upgrades=== | ||
| + | It is possible to upload new firmware from PC to device without taking risk of any unrecorverable damages. We will publish new firmware files when necessary. | ||
== WX3in1 Plus == | == WX3in1 Plus == | ||
| − | === | + | [[Image:wx3in1p.jpg|400px|right|thumb|WX3in1 Plus]] |
| − | * | + | [[Image:wx3in1p_o4.jpg|400px|right|thumb|WX3in1 Plus: печатная плата]] |
| − | * | + | === Различия === |
| − | * | + | Преимущества перед WX3in1: |
| − | * | + | * remote access via web browser, |
| − | * | + | * nicer metal housing, |
| − | * | + | * larger microcontroller for further firmware updates and capabilities, |
| + | * better PCB, | ||
| + | * RS-485 bus for further functionality extensions, | ||
| + | * Remote control via http. | ||
| − | ===APRS | + | === APRS клиент/диджипитер === |
The main purpose of the device is receiving and sending data frames via APRS radio. WX3in1 is capable of receiving an APRS frame, decoding the sender, recipent, path and information field. Then actions are performed in accordance with the options configured by user: | The main purpose of the device is receiving and sending data frames via APRS radio. WX3in1 is capable of receiving an APRS frame, decoding the sender, recipent, path and information field. Then actions are performed in accordance with the options configured by user: | ||
| − | * | + | * Frame forwarding via the APRS network, |
| − | * | + | * Sending a frame to the APRS-IS server, |
| − | * | + | * Ignoring the frame if it does not meet the specified criteria. |
The device firmware implements the following mechanisms: | The device firmware implements the following mechanisms: | ||
| − | * | + | * Checksum Verification - frames with errors are ignored, |
| − | * | + | * Anti-flood - repeated frames in a short time interval are not forwarded, |
| − | * | + | * Path checking - the decision to frame forwarding is based on a path, the user defines whether to forward WIDE1-1, Widen-N, Spn-N frames and the maximum value of n. |
WX3in1 also allows you to generate APRS data frames APRS with information field defined by the user and send them in a specified interval. In this way, it is possible to send beacons and objects. | WX3in1 also allows you to generate APRS data frames APRS with information field defined by the user and send them in a specified interval. In this way, it is possible to send beacons and objects. | ||
| − | ===APRS-IS | + | === APRS-IS клиент === |
WX3in1 allows you to connect to APRS-IS network servers. After loging to selected server, it is possible to send data received from the APRS radio network. All frames with correct format and checksum are sent by the device. | WX3in1 allows you to connect to APRS-IS network servers. After loging to selected server, it is possible to send data received from the APRS radio network. All frames with correct format and checksum are sent by the device. | ||
| Строка 33: | Строка 58: | ||
WX3in1 allows you to receive weather information from weather stations via the RS-232 cable. The data is then encoded into the APRS frame and may be sent to a radio network at specified intervals. Additionally WX3in1 Plus allows you to send the same frames to APRS-IS server. | WX3in1 allows you to receive weather information from weather stations via the RS-232 cable. The data is then encoded into the APRS frame and may be sent to a radio network at specified intervals. Additionally WX3in1 Plus allows you to send the same frames to APRS-IS server. | ||
Supported weather stations: | Supported weather stations: | ||
| − | * | + | * LaCrosse/Technoline WS-2300 |
| − | * | + | * LaCrosse/Technoline WS-2350 |
| − | * | + | * Peet Bros Ultimeter 100 |
| − | * | + | * Peet Bros Ultimeter 800 |
| − | * | + | * Peet Bros Ultimeter 2000 |
| − | * | + | * Peet Bros Ultimeter 2100 |
| − | * | + | * Davis Vantage Pro (with RS232 datalogger) |
| − | * | + | * Davis Vantage Pro2 (with RS232 datalogger) |
| − | * | + | * Davis Vantage Pro Plus (with RS232 datalogger) |
| − | * | + | * Davis Vantage Pro2 Plus (with RS232 datalogger) |
===Firmware upgrades=== | ===Firmware upgrades=== | ||
| Строка 50: | Строка 75: | ||
Since version v1.20 it is possible to configure and view device statistics remotelly via web browser. | Since version v1.20 it is possible to configure and view device statistics remotelly via web browser. | ||
| − | == | + | == Ссылки == |
| − | * [http://microsat.com.pl/product_info.php?cPath=21&products_id=28&osCsid=d7c3ae1e2ad64605b1b002cfd780a889 WX3in1] | + | * [http://microsat.com.pl/product_info.php?cPath=21&products_id=28&osCsid=d7c3ae1e2ad64605b1b002cfd780a889 WX3in1] и форум http://microsat.com.pl/forum/viewforum.php?f=2 |
| − | * [http://microsat.com.pl/product_info.php?cPath=21&products_id=34&osCsid=d7c3ae1e2ad64605b1b002cfd780a889 WX3in1 Plus] | + | * [http://microsat.com.pl/product_info.php?cPath=21&products_id=34&osCsid=d7c3ae1e2ad64605b1b002cfd780a889 WX3in1 Plus] и форум http://microsat.com.pl/forum/viewforum.php?f=7 |
| + | * http://microsat.com.pl/ | ||
| − | [[ | + | [[Категория:Hardware APRS]] |
Текущая версия на 09:39, 1 июля 2012
WX3in1 и WX3in1 Plus - линейка продвинутых APRS диджипитеров от MICROSAT FORUM.
Содержание
WX3in1
APRS клиент/диджипитер
The main purpose of the device is receiving and sending data frames via APRS radio. WX3in1 is capable of receiving an APRS frame, decoding the sender, recipent, path and information field. Then actions are performed in accordance with the options configured by user:
- Frame forwarding via the APRS network,
- Sending a frame to the APRS-IS server,
- Ignoring the frame if it does not meet the specified criteria.
The device firmware implements the following mechanisms:
- Checksum Verification - frames with errors are ignored,
- Anti-flood - repeated frames in a short time interval are not forwarded,
- Path checking - the decision to frame forwarding is based on a path, the user defines whether to forward WIDE1-1, Widen-N, Spn-N frames and the maximum value of n.
WX3in1 also allows you to generate APRS data frames APRS with information field defined by the user and send them in a specified interval. In this way, it is possible to send beacons and objects.
APRS-IS клиент
WX3in1 allows you to connect to APRS-IS network servers. After loging to selected server, it is possible to send data received from the APRS radio network. All frames with correct format and checksum are sent by the device.
APRS-IS messages forwarding
The device allows you to receive messages from the APRS-IS server. Then the destination station is checked if it is heard in the immediate vicinity of the radio APRS network. If a station is heard then message frame is sent via APRS radio and repeated three times in the absence of confirmation ACK.
Weather station server
WX3in1 allows you to receive weather information from the WS2300 and WS2350 stations via the RS-232 cable. The data is then encoded into the APRS frame and may be sent to a radio network at specified intervals. Additionally WX3in1 allows you to send the same frames to APRS-IS server.
Firmware upgrades
It is possible to upload new firmware from PC to device without taking risk of any unrecorverable damages. We will publish new firmware files when necessary.
WX3in1 Plus
Различия
Преимущества перед WX3in1:
- remote access via web browser,
- nicer metal housing,
- larger microcontroller for further firmware updates and capabilities,
- better PCB,
- RS-485 bus for further functionality extensions,
- Remote control via http.
APRS клиент/диджипитер
The main purpose of the device is receiving and sending data frames via APRS radio. WX3in1 is capable of receiving an APRS frame, decoding the sender, recipent, path and information field. Then actions are performed in accordance with the options configured by user:
- Frame forwarding via the APRS network,
- Sending a frame to the APRS-IS server,
- Ignoring the frame if it does not meet the specified criteria.
The device firmware implements the following mechanisms:
- Checksum Verification - frames with errors are ignored,
- Anti-flood - repeated frames in a short time interval are not forwarded,
- Path checking - the decision to frame forwarding is based on a path, the user defines whether to forward WIDE1-1, Widen-N, Spn-N frames and the maximum value of n.
WX3in1 also allows you to generate APRS data frames APRS with information field defined by the user and send them in a specified interval. In this way, it is possible to send beacons and objects.
APRS-IS клиент
WX3in1 allows you to connect to APRS-IS network servers. After loging to selected server, it is possible to send data received from the APRS radio network. All frames with correct format and checksum are sent by the device.
APRS-IS messages forwarding
The device allows you to receive messages from the APRS-IS server. Then the destination station is checked if it is heard in the immediate vicinity of the radio APRS network. If a station is heard then message frame is sent via APRS radio and repeated three times in the absence of confirmation ACK.
Weather station server
WX3in1 allows you to receive weather information from weather stations via the RS-232 cable. The data is then encoded into the APRS frame and may be sent to a radio network at specified intervals. Additionally WX3in1 Plus allows you to send the same frames to APRS-IS server. Supported weather stations:
- LaCrosse/Technoline WS-2300
- LaCrosse/Technoline WS-2350
- Peet Bros Ultimeter 100
- Peet Bros Ultimeter 800
- Peet Bros Ultimeter 2000
- Peet Bros Ultimeter 2100
- Davis Vantage Pro (with RS232 datalogger)
- Davis Vantage Pro2 (with RS232 datalogger)
- Davis Vantage Pro Plus (with RS232 datalogger)
- Davis Vantage Pro2 Plus (with RS232 datalogger)
Firmware upgrades
It is possible to upload new firmware from PC to device without taking risk of any unrecorverable damages. We will publish new firmware files when necessary.
Remote WWW access
Since version v1.20 it is possible to configure and view device statistics remotelly via web browser.
